Browse all guides ↓
Fohhn FS-70 PoE++ Dante beam steering column speaker

Dante and PoE Speakers: Power, Audio and Control Over One Network Cable

By Trianze Tech Team

Planning a networked audio system? Book a site survey or WhatsApp our AV consultants and we will propose the speakers, amplifiers and layout.

A Dante PoE speaker takes power, audio and control over one Ethernet cable from a PoE switch: no amplifier rack, no mains socket at the speaker and no speaker cable. It suits meeting rooms, classrooms, retail and hospitality where the network already reaches every room. Size it with three checks: the PoE class per speaker, the switch's total PoE budget, and a network set up for Dante.

1. How a PoE Speaker Works

The speaker has its own amplifier and DSP inside and receives Dante or AES67 audio over the network. The switch powers it over the same cable. Volume, presets and monitoring are handled in software. Fohhn's PoE speakers, for example, offer monitoring over UDP and plugins for Crestron and Q-SYS.

2. PoE+ or PoE++: Power Decides Level

Speaker PoE class Peak power SPLmax
Fohhn SL-20 PoE+ Class 4 PoE+ (802.3at) 30 W 100 dB
Fohhn Scale-1 PoE+ Class 4 PoE+ (802.3at) 30 W 100 dB
Fohhn Scale-2 PoE++ Class 8 PoE++ (802.3bt) 90 W 105 dB
Fohhn FS-70 PoE++ Class 8 PoE++ (802.3bt) 90 W Beam steering column

PoE+ speakers suit meeting rooms, classrooms and background music. PoE++ speakers give more level for larger rooms, and the FS-70 PoE++ adds beam steering for reverberant spaces (see point source vs column vs beam steering).

3. Size the PoE Switch

Every speaker port must support the class the speaker needs, and the total PoE budget must cover every powered device at peak: speakers, PTZ cameras, touch panels and ceiling microphones. A switch with PoE+ ports only cannot power a PoE++ speaker at full level. The NETGEAR AV Line GSM4248UX, for example, has 40 PoE++ ports at 90 W each and a 2,880 W budget, which covers 32 FS-70 PoE++ columns at their 90 W peak. Ethernet runs are limited to 100 metres per port.

4. Set Up the Network for Dante

Dante needs quality of service so clock and audio packets get priority, and multicast handled with IGMP snooping. AV focused switches ship with Dante profiles that set this up. Read how to choose a network switch for AV over IP for the details.

5. When to Choose PoE Speakers, and When Not

  • Good fit: meeting rooms, classrooms, offices, retail and hotel areas where a network outlet is easier than speaker cable and an amplifier rack.
  • Less suited: large halls, live music and high level systems, where mains powered active speakers or passive speakers with system amplifiers give more headroom (see how to choose a power amplifier).
  • Voice alarm: PoE speakers are generally not part of a certified EN 54 voice alarm system; see our 100 V and EN 54-24 guide.

Networked Audio in Dubai and Abu Dhabi

Trianze Tech designs Dante and PoE audio for meeting rooms, classrooms and hospitality spaces across the UAE, together with the switches that power them. Browse Fohhn, Q-SYS and NETGEAR AV Line switches, and see our public address and background music solutions.

Call +971 58 161 3661 | Chat on WhatsApp

Frequently asked questions

What is a PoE speaker?

A PoE speaker takes its power, audio and control over one Ethernet cable from a PoE network switch, so it needs no amplifier, mains socket or speaker cable. The audio arrives as Dante or AES67 network audio and the speaker has its own amplifier and DSP inside. Fohhn's SL-20 PoE+, Scale-1 PoE+, Scale-2 PoE++ and FS-70 PoE++ are examples.

What is the difference between PoE+ and PoE++ speakers?

PoE+ (IEEE 802.3at, Class 4) delivers up to 30 W per port, and PoE++ (IEEE 802.3bt, Class 8) up to 90 W. More power means more level: the Fohhn SL-20 PoE+ draws up to 30 W for 100 dB SPLmax, while the Scale-2 PoE++ draws up to 90 W for 105 dB SPLmax. The switch port must support the class the speaker needs.

How do I size the PoE switch for speakers?

Check two numbers: every speaker port must support the right PoE class, and the switch's total PoE budget must cover all speakers at peak, plus cameras, panels and microphones on the same switch. For example, the NETGEAR GSM4248UX has 40 PoE++ ports at 90 W each and a 2,880 W budget, enough for 32 Fohhn FS-70 PoE++ columns at their 90 W peak.

How far can a PoE speaker be from the switch?

Standard Ethernet cable runs up to 100 metres from the switch port to the speaker. For longer distances, place a switch closer to the speakers and connect it back over fibre.

Can PoE speakers work with Q-SYS or Crestron?

Yes. Dante and AES67 speakers receive audio from any Dante source, such as a Q-SYS core, a Biamp Tesira or a Dante mixer. Fohhn's PoE speakers also offer monitoring over UDP and plugins for Crestron and Q-SYS, so they appear in the control system.

Where can I buy Dante and PoE speakers in the UAE?

Trianze Tech supplies Dante and PoE speakers from Fohhn, Q-SYS and other brands, together with NETGEAR AV Line PoE switches in Dubai and Abu Dhabi with delivery across the UAE and GCC. Call +971 58 161 3661 or message us on WhatsApp for the best price and current stock availability.

Back to all guides